IBM-007 PC Interface Installation Instructions
-----------------------------------------------------------------


1. Unzip all files in one directory.
2. Click on the "Setup.EXE" file.
3. Follow the rest of the installation process.
4. Reboot computer as needed.


A few reminders:

- If you want to use the interface kit/software with the Robotic Arm Trainer right after installation, please make sure that before you reboot your computer, connect everything to your computer:

Computer --> Printer Cable --> Interface Card --> Robot

- Make sure that the interface card is turned OFF when you start connecting everything. You will only turn ON the interface card AFTER you activate/start up the program. In other words, you should see the interface program on your computer screen first before you turn the interface card ON.

- If the robot suddenly moves after you connect the interface card, turn the interface on, activate the program, etc, just click on the STOP button on the program. Make sure the interface card is turned ON when you click on the STOP
button.



-----------------------------------------------------------------

OWI Inc.
17141 Kingsview Ave
Carson, CA 90746
Phone: 310.515.1900
Fax: 310.515.1606
Email: info@owirobot.com
Web: www.owirobot.com



